Simpson Strong Tie

This debonding tie with sleeve 200mm is ideal for restraining masonry against lateral wind loads but still allowing movement.

Simpson's 100mm x 150mm built in joist hangers are used to connect timber joists to masonry walls or steel beams.

Simpson's 47mm x 150mm built in joist hangers are used to connect timber joists to masonry walls or steel beams.

Simpson's 47mm x 175mm built in joist hangers are used to connect timber joists to masonry walls or steel beams.

Simpson's 47mm x 200mm built in joist hangers are used to connect timber joists to masonry walls or steel beams.

Simpson's built in joist hangers 47mm x 225mm are used to connect timber joists to masonry walls or steel beams.

Simpson's 1000mm engineered strap with a 100mm bend is used for attaching new floors, roofs or walls to an existing masonry wall.

Simpson's 1200mm engineered strap with a 100mm bend is used for attaching new floors, roofs or walls to an existing masonry wall.

Simpson's 1500mm engineered strap with a 100mm bend is used for attaching new floors, roofs or walls to an existing masonry wall.

Simpson's 600mm engineered strap with a 100mm bend is used for attaching new floors, roofs or walls to an existing masonry wall.

Simpson's 3m galvanised external render stop bead provides a clean and straight edge when using multiple coats of plaster whilst reinforcing the plaster edges, ultimately protecting them from damage.

Simpson's 12.5mm x 3m galvanised plasterboard edge bead enchases the edge of the board to reinforce and protect the edges of plasterboard from chipping cracking and damage.

Simpson's truss Clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Simpsons 1000mm heavy duty horizontal flat strap made from steel with a galvanised finish. Ideal for connecting rafters and joints to masonry walls.

Simpson's 1000mm heavy duty twist restraint strap with 150mm twist is used lateral restraint of roof trusses, rafters and joists tied into masonry walls.

40mm x 40mm x 15mm Light angle brackets are commonly used for reinforcing furniture assemblies.

Simpson's 120mm x 50mm x 30mm x 2mm reinforced brackets with adjustable slots are ideal for all assemblies on wood, concrete and metal.

Light reinforced angle brackets are used to assemble small structural joinery for internal and external applications.

Simpson Mini Joist Hanger 47mm is ideal for light duty applications such as trimmers, decking platforms and ceiling joists of rectangular section.

Simpson's 120 x 50 x 30 x 2mm reinforced brackets with adjustable slots are ideal for all assemblies on wood, concrete and metal.

Simpson's 47mm x 200mm timber to masonry hanger is used to connect joists to masonry walls or steel beams.

The Simpson 100mm timber frame tie with 150 girth is used to restrain external brickwork back to timber frame building structures.

The Simpson 100mm timber frame tie with 200 girth is used to restrain external brickwork back to timber frame building structures.

Simpson (Joist) Timber to Masonry Hanger 47mm x 175mm is used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Simpson (Joist) Timber to Masonry Hanger 47mm x 150mm is used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Simpson's Timber to timber long leg hanger is 150mm and ideal for joining 2 bits of timber together. Also commonly called a jiffy hanger.

Simpson's Timber to timber long leg hanger is 47mm and ideal for joining 2 bits of timber together. Also commonly called a jiffy hanger.