SIMPSON BUILT IN JOIST HANGER 47mm x 100mm

Simpson Built in Joist Hanger 47mm x 100mm is used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beam.

Availability: 100 in stock

SKU: 100048

Simpson Built in Joist Hanger 47mm x 100mm is used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Built-in at the base of the hanger to aid inspection from the ground.

Top flange provides widest area in contact with masonry support allowing superior performance.

Embossments on JHM stiffen top flange and holes allow improved mortar keying.

JHM side flange on deeper hangers in much higher than traditional style, providing greatly enhanced resistance to joist rotation.

Manufactured from pre-galvanised mild steel.

Available in: 47mm x 100mm, 150mm, 175mm, 200mm, 225mm & 100mm x 150mm.

Simpson Built in Joist Hanger 47mm x 100mm is used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Built-in at the base of the hanger to aid inspection from the ground.

Top flange provides widest area in contact with masonry support allowing superior performance.

Embossments on JHM stiffen top flange and holes allow improved mortar keying.

JHM side flange on deeper hangers in much higher than traditional style, providing greatly enhanced resistance to joist rotation.

Manufactured from pre-galvanised mild steel.

Available in: 47mm x 100mm, 150mm, 175mm, 200mm, 225mm & 100mm x 150mm.

TREATED CARCASSING TIMBER 50mm x 47mm x 2.4m (2 x 2)