Pavestone's 10kg Wall & Cladding Adhesive is a high performance single part, quick setting, non slip, polymer modified, cement based tile adhesive, formulated to provide enhanced properties of adhesion to a variety of surfaces in interior and exterior situations.
Highly flexible, Pavestone Wall & Cladding Adhesive is ideal for fixing ceramic, fully vitrified, porcelain tiles, mosaics and natural stones.
Coverage:
- External Solid Bed: 2.5 - 3m² per 10kg tub at 3mm bed depth.
- Internal Notched Trowel: Up to 5m² per 10kg tub at 3mm bed depth.
Technical.
- Normal Bed Thickness: Up to 6mm.
- Usable time: 10-20 minutes at 20ºC.
- Setting Time: Approximately 3 hours at 20ºC .
- Grouting after fixing: Approximately 3 hours at 20ºC .
- Installation Temperature: +5°C to +30°C.
- Complies with BS EN 12004 C2FT S1.
Adhesive can be applied to a maximum depth of 12mm in isolated areas.
Exterior installations must be protected from rain and frost until the adhesive has fully set. Where fixing is carried out in hot conditions, the finished tiling should be protected from direct sunlight to avoid premature drying.
When cladding newly built dense concrete block walling, it is advisable to prime the wall first with Pavestone Slurry Primer. The wall must be fully dry before priming. Paint the wall to be cladded with the primer and then allow the wall to dry again before using Pavestone Wall and Cladding Adhesive.
Delivered by Pavestone in 2-3 days.
Laker 
