CLASSIC SCREW 3.5mm x 30mm (30)

Previous productC2 STRONG-FIX SCREW 4mm x 6...

Next productCLASSIC SCREW 4mm x 30mm (2...

Classic Screws are ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. This pack contains 30, 3.5mm x 30mm screws.

Manufacturer: TIMCO

Availability: 2 in stock

SKU: 104608

Classic Screws are ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. This pack contains 30, 3.5mm x 30mm screws.

Features:

Double countersunk reduces the likelihood of head shear and assists completion of countersinking.

Fully threaded 40° deep single thread to provide a secure fixing with high pull-out resistance.

Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.

Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.

All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length.

Made from Austenitic Stainless Steel (A2-304).

Pozi 2 Recess Type.

Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Corrosion Rating (1-5): 4 - Urban & industrial areas with a moderate salt atmosphere.

Available in a range of sizes from 3.5mm x 30mm t0 5mm x 100mm.

Classic Screws are ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. This pack contains 30, 3.5mm x 30mm screws.

Features:

Double countersunk reduces the likelihood of head shear and assists completion of countersinking.

Fully threaded 40° deep single thread to provide a secure fixing with high pull-out resistance.

Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility.

Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.

All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length.

Made from Austenitic Stainless Steel (A2-304).

Pozi 2 Recess Type.

Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Corrosion Rating (1-5): 4 - Urban & industrial areas with a moderate salt atmosphere.

Available in a range of sizes from 3.5mm x 30mm t0 5mm x 100mm.

	Login
	Contact Us
	[email protected]
	Find a Branch
	Get a Quote