TECO EXTERNAL RENDER STOP BELL BEAD 3m

Previous productSIMPSON'S STANDARD GALVANIS...

Next productTIMCO DELTA SANDING PADS MI...

Teco's 3m galvanised external render stop bead provides a clean and straight edge when using multiple coats of plaster whilst reinforcing the plaster edges, ultimately protecting them from damage.

Manufacturer: Teco

Availability: Out of stock

SKU: 100441

Simpson's 3m galvanised external render stop bead provides a clean and straight edge when using multiple coats of plaster whilst reinforcing the plaster edges, ultimately protecting them from damage.

External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a run-off for when rainfall occurs.

For use on traditional wet 2 or 3 coat plaster applications.

Features:

Products simply fixed with plaster dabs or nails.

Edges, arises, corners, joints and abutments all easier to form.

Designed to minimise potential chipping, cracking and associated damage.

16mm-19mm Render Depth, 45mm Wing.

External Applications.

Designed to provide an aesthetic, enhanced weathering detail.

Provides reinforcement to resist impact damage.

Use stainless steel for average or high exposure conditions and coastal areas.

Installation

Edge beads may be fixed by dabs or by masonry nails of similar material.

Plasterboard Edge Bead: Fix the perforated wing flush to the board face before applying final skim coat. The bead may be reversed if required by fixing the wing to the board’s inner surface.

Available in: 3m Galvanised & Stainless Steel.